AWS- A5.36/A5.36M:2012 Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding

$64.00

AWS- A5.36/A5.36M:2012 Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc Welding and Metal Cored Electrodes for Gas Metal Arc Welding

This specification combines the two specifications previously issued by the American Welding Society for the classification of carbon and low-alloy steel flux cored electrodes (AWS A5.20/A5.20M, Specification for Carbon Steel Electrodes for Flux Cored Arc Welding, and AWS A5.29/A5.29M, Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding). 

In addition, this specification includes provisions for the classification of carbon and low-alloy steel metal cored electrodes. Heretofore, carbon steel metal cored electrodes were classified under.

Printed Hard Copy

A5.10/A5.10M:2012 (ISO 18273) Welding Consumables – Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys – Classification, prescribes requirements for the classification of bare, wrought and cast aluminum-alloy electrodes and rods for use with the gas metal arc, gas tungsten arc, oxyfuel gas, and plasma arc welding processes. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other. Approx 45 pages. ISBN 0871715503

Printed Hard Copy

This standard contains the essential welding variables for chromium-molybdenum steel in the thickness range of 1/8 through 1/2 in. in the as-welded condition, or 1/8 in. through 1-1/2 in. in the postweld heat treated (PWHT) condition, using manual shielded metal arc welding. It cites the base metals and operating conditions necessary to make the weldment, the filler metal specifications, and the allowable joint designs for groove welds. This welding procedure specification (WPS) was developed primarily for pipe applications. ISBN 087171-593-7

Printed Hard Copy

More welding solutions