AWS- A5.32/A5.32M:2011 Welding Consumables - Gases and Gas Mixtures for Fusion Welding and Allied Processes

$64.00

AWS- A5.32/A5.32M:2011 Welding Consumables - Gases and Gas Mixtures for Fusion Welding and Allied Processes

A5.32/A5.32M:2011 Welding Consumables - Gases and Gas Mixtures for Fusion Welding and Allied Processes, prescribes the requirement for the classification of gases and gas mixtures for fusion welding and allied processes. Classification is based on composition of the more popular single and multi-component gases. Additional requirements are included for purity and moisture of individual gas components, testing, retesting, packaging, and cylinder or container labeling. An annex is appended to the standard as a source of information concerning the classification system and the intended use of the gases and gas mixtures. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other.

Printed Hard Copy

A5.10/A5.10M:2012 (ISO 18273) Welding Consumables – Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys – Classification, prescribes requirements for the classification of bare, wrought and cast aluminum-alloy electrodes and rods for use with the gas metal arc, gas tungsten arc, oxyfuel gas, and plasma arc welding processes. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other. Approx 45 pages. ISBN 0871715503

Printed Hard Copy

This standard contains the essential welding variables for chromium-molybdenum steel in the thickness range of 1/8 through 1/2 in. in the as-welded condition, or 1/8 in. through 1-1/2 in. in the postweld heat treated (PWHT) condition, using manual shielded metal arc welding. It cites the base metals and operating conditions necessary to make the weldment, the filler metal specifications, and the allowable joint designs for groove welds. This welding procedure specification (WPS) was developed primarily for pipe applications. ISBN 087171-593-7

Printed Hard Copy

More welding solutions