AWS- A5.28/A5.28M:2005 Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding

$64.00

A5.28/A5.28M:2005 Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding prescribes the requirements for classification of solid low-alloy steel electrodes and rods, composite stranded low-alloy steel electrodes, and composite metal cored low-alloy steel electrodes for gas shielded arc welding. Classification is based on chemical composition of the electrode for solid electrodes and rods, chemical composition of weld metal for composite stranded and composite metal cored electrodes and the as-welded or postweld heat treated mechanical properties of the weld metal for each. Additional requirements are included for manufacture, sizes, lengths, and packaging. A guide is appended to the specification as a source of information concerning the classification system employed and the intended use of the electrodes and rods. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these units are not equivalent, each system must be used independently of the other. ISBN 0871710064

Format: Printed Hard Copy

A5.10/A5.10M:2012 (ISO 18273) Welding Consumables – Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys – Classification, prescribes requirements for the classification of bare, wrought and cast aluminum-alloy electrodes and rods for use with the gas metal arc, gas tungsten arc, oxyfuel gas, and plasma arc welding processes. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other. Approx 45 pages. ISBN 0871715503

Printed Hard Copy

This standard contains the essential welding variables for chromium-molybdenum steel in the thickness range of 1/8 through 1/2 in. in the as-welded condition, or 1/8 in. through 1-1/2 in. in the postweld heat treated (PWHT) condition, using manual shielded metal arc welding. It cites the base metals and operating conditions necessary to make the weldment, the filler metal specifications, and the allowable joint designs for groove welds. This welding procedure specification (WPS) was developed primarily for pipe applications. ISBN 087171-593-7

Printed Hard Copy

More welding solutions