AWS- A5.20/A5.20M:2005 Carbon Steel Electrodes for Flux Cored Arc Welding

$64.00

A5.20/A5.20M:2005 Carbon Steel Electrodes for Flux Cored Arc Welding prescribes the requirements for classification of carbon steel electrodes for flux cored arc welding. The requirements include chemical composition and mechanical properties of the weld metal and certain usability characteristics. The AWS A5.20/A5.20M specification also includes optional, supplemental designators for improved toughness and diffusible hydrogen and to indicate conformance to special mechanical property requirements when the weld metal is deposited using both low heat input, fast cooling rate and high heat input, slow cooling rate procedures. Additional requirements are included for standard sizes, marking, manufacturing and packaging. A guide is appended to the specification as a source of information concerning the classification system employed and the intended use of carbon steel flux cored electrodes. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other. ISBN 087171003X

Format: Printed Hard Copy

A5.10/A5.10M:2012 (ISO 18273) Welding Consumables – Wire Electrodes, Wires and Rods for Welding of Aluminum and Aluminum-Alloys – Classification, prescribes requirements for the classification of bare, wrought and cast aluminum-alloy electrodes and rods for use with the gas metal arc, gas tungsten arc, oxyfuel gas, and plasma arc welding processes. This specification makes use of both U.S. Customary Units and the International System of Units (SI). Since these are not equivalent, each system must be used independently of the other. Approx 45 pages. ISBN 0871715503

Printed Hard Copy

This standard contains the essential welding variables for chromium-molybdenum steel in the thickness range of 1/8 through 1/2 in. in the as-welded condition, or 1/8 in. through 1-1/2 in. in the postweld heat treated (PWHT) condition, using manual shielded metal arc welding. It cites the base metals and operating conditions necessary to make the weldment, the filler metal specifications, and the allowable joint designs for groove welds. This welding procedure specification (WPS) was developed primarily for pipe applications. ISBN 087171-593-7

Printed Hard Copy

More welding solutions